| Model & Part Number |
PG70ABDL Ultrasonic Precision Thickness Gauge |
| Material thickness digits display |
• |
| B-Scan cross sectional display |
•
|
| Combined B-Scan and digits display |
• |
| Scan bar display |
• |
| A-Scan display |
+ Rectified, - Rectified, Full Waveform (RF) |
| Measurement Mode |
PE, IE & EE (ThruPaint™) |
Measurement Rate:
Manual
Scan mode
Scan bar display |
4 readings per second
32 readings per second
6 readings per second |
| Measuring Range |
PE (contact) on steel: 1.000 - 254mm (0.040 - 10.000 inches)
PE (contact) on plastic: from 0.254mm (0.010 inches)
IE on steel: 1.27 - 25.4mm (0.050 - 1.000 inch)
IE on plastic: from 0.127mm (0.005 inches)
EE (contact) on steel: 2.54 - 76.20mm (0.100 - 3.000 inches) - ThruPaint™
EE on steel: 0.15 - 12.70mm (0.006 - 0.500 inches) |
| Measurement Accuracy |
±0.001mm (±0.0001 inch) |
| Measurement Resolution |
user selectable: 0.01mm / 0.001mm (0.001 / 0.0001 inch) |
| Velocity Calibration Range |
1250 - 10,000m/s (0.0492 - 0.3936in/ms) |
| Additional Features: |
|
| High speed scan mode |
• |
| Differential mode |
• |
| Limit alarm mode |
• |
| Selectable resolution |
• |
| B-Scan display speed |
15 seconds per screen |
| Calibration setups |
16 factory & 48 user-definable setups transferrable to and from a PC archive |
| Gates |
• PE: 1 gate; IE, Plastic & EE: 1 gate with hold off
• Adjustable threshold |
| Pulser type |
square wave pulser with adjustable pulse width (spike, thin, wide) |
| Gain |
manual or automatic gain control (AGC) with
40dB range (depending on mode selected) |
| Timing |
40MHz with ultra low power 8 bit digitizer |
| Data logging |
• 12,000 readings with waveforms
• grid logging
• Alpha Numeric batch identification
• OBSTRUCT indicates inaccessible locations |
| Calibration Options |
single, two point, velocity & material type |
| Transducer Probe Type |
single element with delay tip, pencil with delay tip & contact probes |
| Transducer Frequency Range |
1 - 20MHz |
| Transducer recognition |
manual - selectable from a list |
| V-path / dual path error correction |
automatic |
| Probe zero |
manual (via integrated probe disk) |
| Display |
1/8" VGA (grayscale), 62 x 45.7mm (2.4 x 1.8inch) viewable area |
| Units (selectable) |
mm or inches |
| LED Backlight |
on / off / auto |
| Repeatability / Stability Indicator |
• |
| Battery Type |
3 x AA alkaline |
| Battery Life (approximate) |
150 hours |
| Low Battery Indicator |
• |
| Battery Save Mode |
auto |
| Operating Temperature |
-10 to 60ºC (14 to 140ºF) |
| Size (w x h x d) |
63.5 x 165.0 x 31.5mm (2.5 x 6.5 x 1.24 inches) |
| Weight (including batteries) |
383g (13.5oz) |
Aluminium case design with gasket sealed
end caps, waterproof membrane keypad |
• |
| Transducer Connector Type |
LEMO |
| RS232 Interface |
Bi-directional |
| Packing List |
Elcometer NDT PG70ABDL gauge, couplant, carry case, user manual,
test certificate, 3 x AA batteries, software, transfer cable |
