| Model & Part Number |
UG20DL Underwater Ultrasonic Gauge
|
| Material thickness digits display |
• |
| Measurement Mode |
Dual Element: PE, EE (ThruPaint™), PECT
Single Element: Triple-Echo (ThruPaint™) |
Measurement Rate
Manual: |
4 readings per second |
| Measurement Range |
PE: 0.63 - 500mm (0.025 - 19.999 inches)
EE: 2.54 - 102mm (0.100 - 4.000 inches)
PECT: 0.63 - 500mm (0.025 - 19.999 inches)
PECT: 10.0 - 254μm (0.001 - 0.100 inches)
Triple: 1.00 - 150mm (0.040 - 6.000 inches) |
| Measurement Accuracy |
±0.01mm (±0.001 inch) |
| Measurement Resolution |
0.01mm (0.001 inch) |
| Velocity Calibration Range |
1250 - 13,995m/s (0.0492 - 0.5510in/ms) |
| Additional Features: |
|
| A-Scan |
stored in memory with each reading for review on PC |
| Calibration setups |
1 user programmable & 8 pre-calibrated velocities for:
aluminium, cast iron, iron, PVC, polyurethane, polystyrene, stainless steel & steel |
| Waterproof - depth ratings |
maximum depth 300 metres (1,000 feet) - equivalent to IP68 |
| Pulser type |
dual square wave pulsers |
| Gain |
time corrected gain (TCG), automatic gain control (AGC) with 100dB range,
or selectable gain: vlow, low, medium hi or vhi |
| Timing |
precision 25MHz TCXO with single shot
100MHz 8bit ultra low power 8 bit digitizer |
| Data logging |
• 5,000 with A-scan image & gauge settings in one batch
• sequential and grid logging
• alpha numeric batch identification |
| Calibration Options |
velocity & material type |
| Transducer Probe Type |
dual and single element |
| Transducer Frequency Range |
1 - 10MHz |
| Transducer recognition |
custom automatic (dual transducers) & manual - selectable from a list |
| V-path / dual path error correction |
automatic |
| Probe Zero |
automatic (dual transducers) & manual (via integrated probe disk) |
| Display |
12.7mm (1/2") 4.5 digit LCD |
| Display Refresh Rate |
25Hz |
| Units (selectable) |
mm or inches |
| Backlight |
on / off / auto |
| Repeatability / Stability Indicator |
• |
| Battery Type |
3 x AA alkaline |
| Battery Life (approximate) |
50 hours (15 hours with backlight on) |
| Low Battery Indicator |
• |
| Battery Save Mode |
auto |
| Operating Temperature |
-30 to 60ºC (-20 to 140ºF) |
| Size (length x diameter) |
229.0 x 60.33mm (9.0 x 2.4 inches) |
| Weight (including batteries) |
680g (24.0oz) |
| Case design |
high strength transparent plastic housing with
single, magnetically coupled, multifunction switch |
| Transducer connctor type |
LEMO underwater connectors |
| RS232 Interface |
Bi-directional |
| Packing List |
Elcometer NDT UG20DL gauge, couplant, carry case, user manual, test certificate,
3 x AA batteries, software, transfer cable, spare gaskets and lubrication set |
