Máy kiểm tra độ dày sơn phủ Elcometer 101

Mô tả

The original non - destructive dry film thickness gauge, the Elcometer 101 was the world’s first portable coating thickness gauge with the original being produced in 1947.

Insensitive to hot and cold surfaces - ideal for hot sprayed metal coatings
Incorporates reading hold feature
Accuracy of ±10%
Ideal for hazardous areas

Đặc điểm kỹ thuật

Part Number	Description	Range
A101A-05A	Elcometer 101 Mechanical Coating Thickness Gauge	0 - 250µm (0 - 10mils)
A101A-01A	Elcometer 101 Mechanical Coating Thickness Gauge	0 - 600µm (0 - 25mils)
Operating Plane	90° to substrate
Minimum Measurement Area	38 x 15mm (1.5 x 0.6”)
Minimum Measurement Diameter	25mm (1”) (on bar material)
Accuracy	±10% of the reading or 2.5µm (0.1mil) which ever is the greater
Certificate available	Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability.
Packing List	Elcometer 101, calibration foils, carry case, wrist harness and operating instructions

Can be used in accordance with:
AS 2331.1.3, ASTM B 499, ASTM G 12, BS 5411-11, ISO 2178, JIS K 56001-7, SSPC PA2

Standards in grey have been superseded but are still recognised in some industries

Phụ kiện

CÔNG TY CỔ PHẦN CÔNG NGHỆ VÀ HỆ THỐNG TOÀN CẦU (GTECH SYSTEMS., JSC)
Địa chỉ: Phòng 107-Tòa nhà A - Tổ 51- Ngõ 270 - Đường Trung Kính - Quận Cầu Giấy - Hà Nội - Việt Nam
Tel: 84-24-37820054/ Fax: 84-24-37820964/ Email: info@gtech.com.vn; Sales@gtech.com.vn; www.gtech.com.vn