Thiết bị kiểm tra độ dày sơn Elcometer 141

Mô tả

The Elcometer 141 PIG is a quick, versatile method of examination and destructive measurement of coatings in a portable, easy to use instrument.

Ergonomically designed to give a balanced weight distribution for a consistent cut, it is ideal for tough coatings and enamels.

Large easy grip handle - makes cutting thick or hard coatings easy
Internal cutter storage compartment
x50 magnification microscope

Đặc điểm kỹ thuật

Part Number	Description
A141---D	Elcometer 141 Paint Inspetcion Gauge
Scale Range (maximum)	0 to 1.8mm (0 to 0.07")
Scale Resolution	0.02mm (0.001")
Dimensions (fitted to handle)	160 x 100 x 35mm (6.3 x 4 x 1.4”)
Weight (fitted to handle)	510g (1lb 2oz)
Certificate available	Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory
Packing List	Elcometer 141 P.I.G, x50 microscope, 3 cutters, marker pen, hexagonal wrench, carry case, operating instructions

Can be used in accordance with:
AS 1580.108.2, ASTM D 4138-A, BS 3900-C5-5B, DIN 50986, ISO 2808-5B, ISO 2808-6B, JIS K 5600-1-7, NF T 30-123

Standards in grey have been superseded but are still recognised in some industries

Phụ kiện

Part Number	Description	Cutting Angle	Measurement Range	Graticule Scale Factor
T99915761-1	Tungsten Carbide Cutter No 1	45°	20 - 2000?m (1 - 80mils)	20?m (1mil)
T99915761-4	Tungsten Carbide Cutter No 4	26.6°	10 - 1000?m (0.5 - 35mils)	10?m (0.5mil)
T99915761-6	Tungsten Carbide Cutter No 6	5.7°	2 - 200?m (0.1 - 8mils)	2?m (0.1mil)

CÔNG TY CỔ PHẦN CÔNG NGHỆ VÀ HỆ THỐNG TOÀN CẦU (GTECH SYSTEMS., JSC)
Địa chỉ: Phòng 107-Tòa nhà A - Tổ 51- Ngõ 270 - Đường Trung Kính - Quận Cầu Giấy - Hà Nội - Việt Nam
Tel: 84-24-37820054/ Fax: 84-24-37820964/ Email: info@gtech.com.vn; Sales@gtech.com.vn; www.gtech.com.vn