Máy đo độ dày sơn phủ Elcometer 355

Có các model standard và top, bộ nhớ lớn lưu lên tới 10,000 kết quả đo trong các nhóm và dữ liệu có thể truyền sang máy tính, bộ ghi dữ liệu hoặc máy in theo yêu cầu.

Với dải module đầu dò lớn, có thể chọn lựa đơn giản cho từng ứng dụng. Tất cả các module đều được cấp kèm các phoi hiệu chuẩn.

• Độ chính xác lớn hơn ±1% hoặc 1µm
• Vỏ thiết bị được thiết kế bằng nhôm giúp cho sử dụng ở các môi trường khắc nghiệt
• Cấp kèm phần mềm ElcoMaster™ 2.0 .
• Các phân tích thống kê đầy đủ - độ lệch tiêu chuẩn trung bình, số lần đo, giá trị cao nhất và thấp nhất
• Đầu ra RS232
• Ngày và giờ

Each gauge is supplied without a probe allowing the choice of the correct probe for the relevant applications.

Can be used in accordance with:

AS 2331.1.4, AS 3894.3-B, AS/NZS 1580.108.1, ASTM B 244, ASTM B 499, ASTM D 1186-B, ASTM D 1400,
ASTM D 7091, ASTM E 376, ASTM G 12, BS 3900-C5-6A, BS 3900-C5-6B, BS 5411-3, BS 5411-11, BS 5599, 
DIN 50981, DIN 50984, ECCA T1, EN 13523-1, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 19840, 
ISO 2063, ISO 2360, ISO 2808-6A, ISO 2808-6B, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, ISO 2808-12, 
JIS K 5600-1-7, NF A49-211, NF T30-124, SS 184159, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32

The Standards in grey have been superseded but are still recognised in some industries

Unique probe modules allow the Elcometer 355 Standard Coating Thickness Gauges to be versatile and flexible for any measurement application.

Probe modules can be freely interchanged as required for both ferrous (F) and non-ferrous (N) metal substrates.

Most probe modules are capable of an accuracy of ±1% of the reading on a variety of coatings and surfaces.

Telescopic probes extend from 410mm (16”) to 1100mm (43”).

Part Number & Description	Measuring Range	Accuracy	Range Steps	Resolution
T35511952 F1 Standard		0-1500µm (0-60mils)	±1% or ±1µm (±0.04mil)	0-200µm (0-8mils) 200-500µm (8-20mils) 500-1500µm (20-60mils)	0.1µm (0.005mil) 0.5µm (0.02mil) 1.0µm (0.05mil)
T35511953 F1 Right Angle
T35511959 F1 Telescopic
T35512400 F1A (Automotive)
T35511954 F2 Standard		0-5mm (0-200mils)	±1% or ±5µm (±0.2mil)	0-500µm (0-20mils) 500-5000µm (20-200mils)	2µm (0.1mil) 5µm (0.2mil)
T35511955 F2 Right Angle
T35511960 F2 Telescopic
T35511956 F3 Standard		0-13mm (0-500mils)	±2% or ±30µm (±1mil)	0-1000µm (0-40mils) 1-13000µm (40-1500mils)	5µm (0.2mil) 10µm (0.5mil)
T35511950 F4 Standard		0-250µm (0-10mils)	±1% or ±1µm (±0.04mil)	0-250µm (0-10mils)	0.1µm (0.005mil)
T35511951 F4 Right Angle (long)
T35513511 F4 Right Angle (short)
T35511962 F5 (Rebar)		0-800µm (0-32mils)	±1% or ±2µm (±0.08mil)	0-800µm (0-32mils)	1µm (0.1mil)
T35511964 F6 Standard		0-25mm (0-1000mil)	±2% or ±100µm (±4mils)	0-500µm (0-200mils) 5000-25000µm (200-1000mils)	10µm (0.5mil) 50µm (2mil)
T35511982 N1 Standard		0-1500µm (0-60mils)	±1% or ±1µm (±0.04mil)	0-200µm (0-8mils) 200-500µm (8-20mils) 500-1500µm (20-60mils)	0.1µm (0.005mil) 0.5µm (0.02mil) 1.0µm (0.05mil)
T35511983 N1 Right Angle
T35511984 N2 Standard		0-5mm (0-200mils)	±1% or ±15µm (±0.6mil)	0-500µm (0-20mils) 500-5000µm (0-200mils)	2µm (0.1mil) 5µm (0.2mil)
T35511980 N4 Standard		0-250µm (0-10mils)	±1% or ±1µm (±0.04mil)	0-250µm (0-10mils)	0.1µm (0.05mil)

Elcometer 355 Probe Accessories

	JUMBO HAND GRIP
Ideal for precision placement for the most accurate results on flat and curved surfaces. Place the probe inside the Jumbo Hand Grip and take measurements - ideal when wearing gloves.
T9997766-	Jumbo Hand Grip - F and N Probes
Use with the following Elcometer 355 probes: F1 Standard, F2 Standard, F4 Standard, F5 Rebar, N1 Standard

	V-PROBE ADAPTOR
Ideal for precision placement for the most accurate results on medium and large diameter curved surfaces such as pipes and cylinders.
T9997381	V-Probe Adaptor - F and N Probes
Use with the following Elcometer 355 probes: F1 Standard, F2 Standard, F4 Standard, F5 Rebar, N1 Standard

	SOFT MATERIAL/BLANKET PROBE
Ideal for taking precision readings on soft coatings or printing blankets. The wide, flat base design acts as a load spreader, reducing the total force at a single point.
T35511963	Soft Material/Blanket Probe for the Elcometer 355

	PROBE PLACEMENT JIG
For the most reliable and repeatable coating thickness measurements, making the gauge score highly in repeatability and reproducibility studies. Ideal for small and large components alike. The probe placement jig is supplied with a probe housing to suit standard F1, F2, F4, F5 and N1 probes. Housings to suit other probes are available as optional accessories.
T95012880	Probe Placement Jig
T95013028	Component Hand Vice - a simple vice to hold small components
T95012888	Cable Release Assembly - ideal for remote measurements
T95015589	N4 Probe Adaptor - must be purchased for use with N4 Probes
Use with the following probes: F1 Standard, F2 Standard, F4 Standard, F5 Rebar, N1 Standard and N4 Standard