Elcometer has a wide range of transducers available for use with the Elcometer 205, 206, 206DL, 208 & 208DL Ultrasonic Thickness Gauges. When selecting a transducer, it is important to choose one which will meet the application, taking the following into consideration:
- The type of material to be tested.
- The design of the transducer probe.
- The measurement range.
- Whether the shape of that substrate is flat or curved or hard to reach.
Please note that transducers are consumables and wear out with use.
- A range of frequencies and sizes is available to meet specific needs.
- Straight and right angle transducers available as potted or microdot.
- Potted Transducers: the transducer cable is fixed to the transducer head on the cable to be replaced quickly and easily. These are more suitable for surfaces with a greater curvature and have a smaller footprint.
- High Temperature transducers: temperature up to 340°C (650°F).
Select from transducer options
Definitions:
- Microdot Transducer:
The cable can be unplugged from the transducer and can be easily replaced on site should it become damaged.
- Potted Transducer:
Unlike the microdot transducers, the cables are hard wired into the transducer head.
- Exxon Specification
The gauge and transducer combination must hit specified standards without missing the first cycle.
