Các kit nhiễm muối

The Elcometer 138/2 Surface Contamination Kit provides the means for testing invisible surface contaminants: pH ...

Designed to accurately, measure surface chloride, sulphate and nitrate ions in minutes, the Elcometer 134 CSN Salt kit offers a...

Chloride salts left on the surface before the first coat is applied can result in the coating system being forced off the surface...

If the chloride levels in the wash water are too high, this will promote premature corrosion, shortening the life of both steel...

Chlorides deposited on a surface by contaminated abrasives during blasting can cause a coating to fail prematurely....

Soluble salts on a surface are absorbed into a special filter paper soaked with distilled water. The Elcometer 130 measures the...

It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the...